Single Spring Mechanical Seals Suppliers

Single Spring Mechanical seal consists of a Single Spring whether it is Helical Spring or Conical Spring or Wave spring. It consists of primary sealing ring assembled with an ‘O’ ring and springs. The purpose of this is to force the seal ring faces across the face and keep it from leaking to the atmospheric side of the seal.

The dynamic ‘O’ ring is designed to move axially (be pushed) along the shaft or sleeve. If solids are abundant in the sealing fluid, they can build up on the ‘O’ ring and prevent this axial movement (hangup) thussurface underneath the dynamic ‘O’ ring must therefore be very smooth to allow for axial movement of Seal Ring.

Single Spring Mechanical seal comes with Clutch type where direction of rotation is not important. Open type and close type Single spring mechanical seal to the medium fluid. Tt can be made balanced or unbalanced depending upon stuffing box pressure. Contact and non-contact of Spring with medium fluid depending of nature of fluid viscosity.